Advertisement
RST
ENT
3. Hardware Installation
The LCD KVM provides a standard 19-inch rack for the
installation
accessories attached with the product package. First install the
accessories to the device and then the device to the rack.
Step 1. Screw the front flange to the rack first. Slide the bars
with the rear flange towards the rack until the flanges
make contact with the rack, then screw the rear flanges
to the rack.
Detect the PS2/USB signal of port again.
User can select by pressing the number buttons
and press "ENT" to confirm, then it will switch
to the corresponding port. If that port is offline
or the wrong number is pressed which is not
included in display scope, there will be no
response, but just keep the present status.
of
devices.
1
Please
use
2
3
– 4 –
the
rack
installation
4
Advertisement
