Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Type
Jumper
CLR_CMOS Button Clear CMOS
SATA_DOM
3-pin SATA DOM
3-pin
V C O N
LCD_PWR
3-pin
To avoid the system instability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Default Settings"
and then "Save and Exit Setup".
Description
Reserve
LCD Power
Selection
Installing the Motherboard
Setting (default)
Press the button
to clear CMOS
Before clearing the
CMOS, make sure to
turn off the system.
1-2: VCC
2-3: Ground
1-2: VCC3
2-3: Ground
1-2: VCC
2-3: VCC3
1
SATA_DOM
1
V C O N
1
LCD_PWR
11