Table of Contents
Advertisement
BATTERY TOOL USE AND CARE
8B
Read, understand and always follow the safety instructions
which came with your battery and charger. Failure to do so may
DC
result in electric shock, fire or other hazardous situations. Keep all
cm
the instructions together in a safe place for future reference.
mm
Battery-operated products do not have to be plugged into
0 W
an electrical outlet; therefore, they are always in operating
condition. Remove the start key whenever you are not operating
min
the product.
8 kg
Remove the battery pack before making any adjustments,
50 L
cleaning, or removing material from the product.
cm
Ensure the start key is removed before inserting battery pack.
cm
A battery pack must be recharged only with the charger
specified by the manufacturer. Using a charger with an
incompatible battery pack may create a risk of fire. Use battery pack
only with charger listed.
ded
Use only battery pack intended specifically for the product.
ded
Use of any other battery packs may result in a risk of fire, electric
201
shock, or injury to persons.
58S
When battery pack is not in use, keep it away from other metal
objects like, paper clips, coins, keys, nails, screws, or other
small metal objects, that can make a connection from one
terminal to another. Shorting the battery pack terminals together
may cause sparks, burns, fire, or explosion.
092)
Do not place battery products or their batteries near fire or
ords
heat. This increases the risk of explosion and possibly injury.
Do not open or mutilate the battery pack. Released electrolyte
is corrosive and may cause damage to the eyes or skin. It may be
nce.
toxic if swallowed.
Protect the battery pack against moisture and water. Do not
charge the product in a damp or wet location. Following this rule will
wn.
reduce the risk of electric shock.
In case of damage and improper use of the battery, vapour may
vely
be emitted. Provide for fresh air and seek medical help in case of
slip-
complaints. The vapour can irritate the respiratory system.
Do not leave the battery pack inside a vehicle in hot or cold
conditions.
pets
Do not incinerate the battery.
own
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with
ere
water. If liquid contacts eyes, additionally seek medical help. Liquid
duct
ejected from the battery may cause irritation or burns.
oys,
ngle
LAWN MOWER SAFETY WARNINGS
ght.
Before using, always visually inspect to ensure blades, blade
uch
bolts, and cutter assembly are not worn or damaged.
The
Replace worn or damaged blades and bolts in sets to preserve
balance.
The blade on this mower is sharp, use extreme caution and
wear heavy duty gloves when fitting, replacing, cleaning or
for
checking bolt security.
heir
Bring the product to an authorised service centre to replace
damaged or unreadable labels.
the
Check all nuts, bolts, and screws at frequent intervals for
duct
proper tightness to be sure the equipment is in safe working
main
condition.
Check the grass catcher frequently for wear, holes, or
hful
deterioration.
and
Replace worn or damaged parts before operating the product.
The mower must be started with the user behind the handlebars
ees,
in the operator safety zone. Never start the product if:
may
■
all four wheels are not on the ground
■
the grass discharge chute is exposed without being protected
by either the mulching plug and grass discharge chute cover, or
the grass catcher and grass discharge chute cover
■
hands and feet of all persons are not clear of the cutting
enclosure
Never operate the product if the on/off switch on the handlebar
does not properly start and stop the mower.
Never attempt to lock the on/off switches in the on position,
this is extremely dangerous.
Do not force the product. It will do the job better and safer at the
speed for which it was designed.
Stop the blade when crossing gravel surfaces.
Do not pull the product backward unless absolutely necessary.
If you must back the product away from a wall or obstruction, first
look down and behind to avoid tripping or pulling the product over
your feet.
Stop the motor and allow the blade to stop if the mower has to
be tilted for transportation when crossing surfaces other than
grass, and when transporting the product to and from the area
to be mowed.
Never use the product with defective guards or shields, or
without safety devices, for example, deflectors and/ or grass
catcher, in place.
Do not tilt the lawn mower when switching on the motor or
while the motor is running. This exposes the blade and increases
the probability of objects being thrown.
Switch on the motor carefully according to instructions and
keep hands and feet away from cutting area. Keep clear of
the discharge opening at all times. Do not start the product when
standing in front of the discharge opening.
Do not put hands or feet near or under rotating parts. Keep
clear of the discharge opening at all time.
Never pick up or carry the product while it is running.
Stop the mower motor and remove start key, make sure that all
moving parts have come to a complete stop for the following
cases:
■
whenever you leave the product unattended (including disposal
of grass clippings)
■
before cleaning a blockage or unclogging discharge chute
■
before checking, cleaning or working on the product
■
after striking a foreign object; inspect the product for damage
and make repairs as necessary before restarting and operating
the product
■
before removing the grass catcher or opening the grass
discharge chute cover
If the product starts to vibrate abnormally (check immediately):
■
inspect for damage, particularly the blades
■
replace or repair any damaged parts
■
check for and tighten any loose parts
Avoid holes, ruts, bumps, rocks, property stakes, or other
hidden objects. Uneven terrain could cause a slip-and-fall
accident.
Always ensure the motor control cable is never trapped,
pinched, or otherwise damaged during assembly or when
folding the handle.
OVERLOAD, OVERHEAT, AND TILT PROTECTION
The product has an overload protection device. When overloading
is detected, the product will automatically switch off. If the overload
protector is actuated, the on-off button must be released. Press the
on-off button to restart the product.
The product has overheat protection. Excessive temperatures will
31
31
Hide quick links:
Advertisement
Table of Contents
