No.ma427<Rev.001>)1 - JVC KW-NX7000J Service Manual

4.6.3 Service mode 3
Keep this state more 2 seconds
while continuing pressing the
[DISP] button, [VOLUME -] button
and TOUCH PANEL [ DOWN]
button sequentially.
Screen indication
SERVICE MODE 3
SERVICE MODE
INITIALIZE ALL
RUNNING MODE
Exchanging it operate a menu of a service mode with the [UP] button and [DOWN] button.
Operate choice of a menu with a [ENTER] button.
Exchanging it operate a menu
of a service mode with the [UP]
button and [DOWN] button.
Operate choice of a menu with
a [ENTER] button.
Return to previous menu with
a [BACK] button.
1-26 (No.MA427<Rev.001>)
SERVICE MODE
SERVICE MODE
VERSION
AREA/REGION
TEMPERATURE
MEMORY CHECK
DVD NTSC/PAL
DVD CHECK MODE
SERVICE MODE
ERROR READ
ERROR CLEAR
BT VERSION
Micon version indication
VERSION
Main micon version and ROM correction version
MAIN V**** [**]
DVD module version
DISC ****
CH version
CH ******
Panel micon version and ROM correction version
PN V**** V*** [**]
Area and region indicattion
AREA/REGION
Main micon area
SYS-AREA : **
DVD module area
DISC-AREA : **
Region
REGION : *
PANEL-AREA :**
Panel area
TEMPERATURE Temperature data reading
Temperature data by the temperature sensor in the main micon
and DVD module is read every 5 seconds and displayed in hex numbers.
MEMORY CHECK ( It is displayed only at the time of the disc insertion )
Memory residual quantity indication mode
Data residual quantity of a disc is displayed by LCD.
About the playback control-related key ([FSKIP], [BSKIP],
[UP], [DOWN], [VOL]), only movement is effective.
Indication does not change as memory residual quantity indication.
About cancellation of this mode, press the
[STANDBY/ON ATTENUATOR] button.
DVD NTSC/PAL
DVD picture change
NTSC
DVD unit output picture setting (NTSC)
PAL
DVD unit output picture setting (PAL)
DVD CHECK MODE
See "DVD CHECK MODE" for details.