FRONT PANEL CONTROL
•
:
Power
Press this knob to switch ON/OFF of monitor' s power.
•
MENU/Exit :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Brightness/Contrast OSD status.
•
/
Contrast
Adjust contrast or function adjust.
•
Brightness
Adjust brightness or function adjust.
• Auto Config Key:
The Auto Adjust Key is used to automatically set the H POs, V Pos, Clock
and Focus.
• Power Indicator:
Green
—
Orange
—
NOTES
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene,
or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
:
/
:
Power On mode.
Off mode.
8