Table of Contents
Advertisement
8.
Red
9.
Green
Blue
10.
73
11.
(7300K) Color
93
12.
(9300K) Color
13.
Reset
Exit
14.
HOW TO OPTIMIZE THE DOS-MODE
1. Use the full-screen pattern which is attached in your driver-disk to start the
adjustment ( press twice at Dos1.exe , and expand the picture to full
screen with pressing the icon
nothing to press if the picture is already full screen )
If you don' t have monitor driver disk, you can try the following way to get
the full screen pattern at MS-DOS mode , type in C:\>
You will be in the Dos-Editor screen
2. Press "AUTO" button( at front bezel) during 2 seconds , the monitors will
do all the adjustment automatically
3. Press "ESC" to quit the pattern file ,or press ALT-F, and then X to exit
from the Dos-Editor screen
If the DOS-MODE characters still have distortion
● the picture can' t go to full screen
example :
● the background of white pattern has vertical stripe noise
● the character twisted
that means your monitor parameter was in wrong resolution, please check if
your VGA-CARD supports 720x400 @ 70 Hz
in general, most of the Dos mode was set by VGA-CARD in resolution
720x400@70Hz, but minor was set in 640x400 @ 70Hz ( our monitor only
supports 720x400@70Hz)
Adjusts Red intensity.
Adjusts Green intensity.
Adjusts Blue intensity.
The color temperature for 7300°K is
x=0.301, y=0.317.
The color temperature for 9300°K is
x=0.281, y=0.311.
Clear each old status of auto-configuration
And re-do auto-configuration.
Save user adjustment and OSD disappear.
on the top of window, but there is
10
EDIT
[press enter]
Advertisement
Table of Contents
