Subscribe to Our Youtube Channel
Related Manuals for DCE ANS-205
Summary of Contents for DCE ANS-205
- Page 1 User's Manual ANS-205 5-port Industrial 10/100 Mbps Ethernet Switch QUALITY COMMUNICATIONS PRODUCTS Made in the U.S.A.
-
Page 2: Specifications
Introduction: The ANS-205 has 5 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto MDI/MDIX function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. -
Page 3: Led Functions
LED functions: Standard RJ45 female connectors are provided. A standard RJ45 plug cable is all that is necessary to connect your device to the unit since switch that supports auto crossover. Table 1 shows the LED indicator functions. The module includes an internal. Table 1 Pin-Out: Color... -
Page 4: Checking Power
The Input voltage range is 10~30VDC. SEE PAGE 4 FOR WIRING INFO External power supply is connected using the removable terminal block as shown below: Dimensions: The width of the ANS-205 is just 32.30 mm, so it can be used where space is important. ANS-205 User’s Manual (Version 1.6,Oct/2004) --------------- 3... - Page 5 Pin Function For Terminal Block: External power supplies are connected using the removable terminal block: +Vs: Power input +10 to +30V GND : Ground and F.G. : F.G. stands for Frame Ground (protective ground). It is optional. If you use this pin, it can reduce EMI radiation;...
Need help?
Do you have a question about the ANS-205 and is the answer not in the manual?
Questions and answers