JVC KW-AVX900EU Service Manual page 13

3.1.4 Removing the TOP CHASSIS assembly (See Fig.8 to 11)
(1) Disconnect the card wire from TOP CHASSIS assembly
connected to connector
sembly. (See Fig.8)
(2) Remove the two screws J attaching the FRONT BOARD
assembly. (See Fig.8)
(3) Disconnect the connector wire from MAIN BOARD assem-
bly connected to connector
sembly. (See Fig.9)
(4) Disconnect the card wire from MAIN BOARD assembly
connected to connector
sembly. (See Fig.9)
(5) From left side of MAIN BODY, remove the two screws K at-
taching the TOP CHASSIS assembly. (See Fig.10)
(6) From right side of MAIN BODY, remove the two screws L
attaching the TOP CHASSIS assembly. (See Fig.11)
CN702 of the MAIN BOARD as-
CN902 of the SUB BOARD as-
CN904 of the SUB BOARD as-
CN702
Fig.8
CN904 CN902
Fig.9
K
Fig.10
L
Fig.11
J
K
L
(No.MA341)1-13