JVC KW-AVX900EU Service Manual page 18

3.2 Monitor section
3.2.1 Removing the FRONT BRACKET assembly (See
Fig.1)
(1) Remove the two screws A attaching the FPC COVER.
(2) Remove the four screws B attaching the FRONT BRACK-
ET assembly.
(3) Remove the two screws C attaching the FRONT BRACK-
ET assembly.
3.2.2 Removing the PANEL BOARD assembly (See Fig.2)
(1) Disconnect the connector wire from LCD module connect-
ed to connector CN471
(2) Disconnect the card wire from SWITCH BOARD assembly
connected to connector
PANEL BOARD assembly.
(3) Remove the four screws D attaching the PANEL BOARD
assembly.
(4) Straighten hook a attaching the PANEL BOARD assembly.
3.2.3 Removing the LCD module (See Fig.3)
(1) Remove the six screws E attaching the PANEL BRACKET
assembly. (See Fig.3)
(2) Disengage seven hooks b engaged PANEL BRACKET.
1-18 (No.MA341)
of the PANEL BOARD assembly.
CN431, CN511 and CN591
B
of the
D
CN431 CN511
hook
E
b
hook
C
A
Fig.1
a
hook CN471
CN591
Fig.2
b
b
hook
E E
Fig.3
B
D
E