Chevrolet MyLink2018 Manual page 99

98 Phone
4. Enter the DTMF tones using
the keypad if needed.
Bluetooth (Voice
Recognition)
Using Bluetooth Voice
Recognition
To use voice recognition, press
on the steering wheel controls. Use
the commands below for the various
voice features. For additional
information, say Help while in a
voice recognition menu. See Voice
Recognition 0 85 for help using
voice recognition commands.
Making a Call
Calls can be made using the
following commands.
Using the Dial or Call
Command
To call a number:
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Dial or Call followed by
the complete phone number.
Use the Voice Keypad command
for international numbers or special
numbers which include * or #.
Once connected, the person called
will be heard through the audio
speakers.
g
To call using a contact from your
phone book:
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Dial or Call and then
say the contact name. For
example Call John at Work.
Once connected, the person called
will be heard through the audio
speakers.
Calling Local Emergency Numbers
g
1. Press . The system responds
Command Please, followed
by a tone.
2. Say Call <emergency
number>.
Once connected, the person called
will be heard through the audio
speakers.
Using the Switch Phone
Command
g
1. Press . The system responds
Command Please, followed
by a tone.
2. After the tone, say Switch
Phone. The system displays a
list of phones to select.
Using the Voice Keypad
Command
g
1. Press . The system responds
Command Please, followed
by a tone.
2. After the tone, say Voice
Keypad. The system allows
entry of special numbers and
characters.
Using the Voice Mail Command
g
1. Press . The system responds
Command Please, followed
by a tone.