Chevrolet MyLink2018 Manual page 50

3. Press MEDIA on the remote
control and use the arrows to
change the source to HDMI.
USB
There are two USB ports to provide
the RSI system audio/video from
supported devices, as well as
provide device charging.
Audio from these ports can only be
heard and controlled by the rear
seat passengers. Video can be
heard, shown, and controlled by the
rear and front passengers.
To use the USB:
1. Insert the device into one of the
two ports.
2. Select the source (USB 1 or
USB 2) through the rear screen
menu using MEDIA on the
remote control.
3. Select the source via the front
by touching VIDEO on the
Home Page.
Audio Output
Audio from a Blu-Ray/DVD/CD
player or HDMI inputs can be heard
through:
Wireless headphones: Available
for any source depending on the
selected channel.
Vehicle speakers: Touch VIDEO
on the Home Page. Select any
other source to stop the speaker
audio; rear audio will continue
to play.
Vehicle wired headphone jack:
See Wired Headphone Jack
following.
The RSI system transmits the audio
signal to the wireless headphones if
an audio signal is available. See
Headphones earlier in this section.
Front seat passengers can listen to
playback from the attached rear
device through the vehicle speakers
by selecting that source from the
Video Application on the front
display Home screen.
Rear Seat Infotainment
Wired Headphone Jack
Select MENU on the remote control,
then select Settings and then Wired
Headphones to listen to audio on
the wired headphones. The
headphone audio plays depending
on which screen is selected. The
default is screen 1 audio.
Remote Control
Remote Control Buttons
7
1. (Previous/Reverse)
Radio: Press to seek the
previous radio station.
CD: Press to seek the
previous track.
Blu-ray/DVD: Press to seek
the previous chapter.
49