Chevrolet MyLink2018 Manual page 95

94 Phone
Bluetooth (Infotainment
Controls)
For information about how to
navigate the menu system using the
infotainment controls, see Using the
System 0 15.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
the cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls can
be made using OnStar Hands-Free
Calling (if equipped). See OnStar
in the owner s manual.
Pairing Information
A Bluetooth phone with music
capability can be paired to the
vehicle as a phone and a music
player at the same time.
Up to 10 devices can be paired
to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
One Bluetooth device can be
connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the paired
cell phone in the order that they
were last used in the system. To
link to a different paired phone,
see Linking to a Different
Phone later in this section.
Pairing a Phone
1. Touch PHONE on the
Home Page.
2. Select Phone and select Pair
Device.
3. A four-digit Personal
Identification Number (PIN)
appears on the display. The
PIN, if required, may be used
in Step 5.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate Chevrolet MyLink on
the display. Follow the
instructions on the cell phone
to enter the PIN provided in
Step 3 or confirm the six-digit
code shown on the display.
After the PIN is successfully
entered or the code is
confirmed, the system
responds with <Device name>
has been successfully paired
when the pairing process is
complete.
6. If Chevrolet MyLink does not
appear, turn the phone off or
remove the phone battery and
retry.