Using The Software; Troubleshooting - Lenovo MORFFGOO Important Information Manual

Important Information about Lenovo® Optical Wireless Mouse
To install the mouse, connect the mouse to an available USB connector on your computer. The New Hardware Found
window opens, and the Windows operating system will automatically install the proper device driver for the mouse. Then,
the mouse is ready for use.

Using the software

Using the software Using the software Using the software
Each mouse has multiple functions and features such as zooming and auto-scrolling, which help you increase your
productivity. You also can assign frequently used functions or shortcuts to the mouse buttons using the Lenovo Mouse
Suite software.
To use the Lenovo Mouse Suite software, do the following:
1. Click Start Start ➙ All Programs All Programs ➙ Lenovo Mouse Suite
Start Start All Programs All Programs
2. The main window opens with several tabs. Click each tab to view related settings. On each tab there are four buttons:
• OK OK: Save your settings and close the window. OK OK
• Cancel Cancel Cancel: Exit the window without saving. Cancel
• Apply Apply: Have your changes take effect without closing the window.
Apply Apply
• Help Help Help: View the help information system. Help
Note: The Lenovo USB Laser Mouse supports the mouse resolution from 400 dots per inch (DPI) to 2000 DPI. By default, Note: Note: Note:
the mouse resolution setting is 1600 DPI. The ThinkPad USB Laser Mouse supports the mouse resolution from 400 DPI to
1600 DPI. By default, the mouse resolution setting is 1200 DPI. To change the resolution setting, do the following:
1. Click Start Start ➙ All Programs Start Start All Programs ➙ Lenovo Mouse Suite All Programs All Programs
2. In the Mouse Properties window, click the Lenovo
3. In the Resolution Adjustment Setup Resolution Adjustment Setup area, select the corresponding radio button to set the preferred mouse resolution.
Resolution Adjustment Setup Resolution Adjustment Setup
4. To confirm your setting, click Apply

Troubleshooting

Troubleshooting Troubleshooting Troubleshooting
This topic contains troubleshooting information for the mice. If you encounter any of the following problems when using the
mice, refer to the corresponding answers.
Problem: Problem: Problem: Problem: The mouse is not recognized by the operating system.
Solution: Solution: To solve the problem, perform one of the following procedures:
Solution: Solution:
Procedure A: Procedure A: Procedure A: Procedure A:
Check the following:
• Install the mouse again.
• Access your computer Basic Input/Output System (BIOS) Setup Utility program during the startup process and make
sure that all the USB connectors on your computer are enabled.
Notes: Notes: Notes: Notes:
– For information about how to access or use the BIOS Setup Utility program on your computer, see the documentation
that came with your computer.
Lenovo Mouse Suite ➙ Mouse Suite
Lenovo Mouse Suite Lenovo Mouse Suite
Lenovo Mouse Suite ➙ Mouse Suite Lenovo Mouse Suite Lenovo Mouse Suite
Lenovo tab. Then, click Advanced Properties Lenovo Lenovo
Apply. For more information about the setting, click Help
Apply Apply
Mouse Suite.
Mouse Suite Mouse Suite
Mouse Suite. Mouse Suite Mouse Suite
Advanced Properties. Advanced Properties Advanced Properties
Help.
Help Help