Specifications - Yamaha MG32/14FX Service Manual

SPECIFICATIONS

General Specifications
Frequency Characteristics (Master Output)
Total Harmonic Distortion (Master Output)
Hum and Noise (20 Hz - 20 kHz)
Input GAIN = Maximum
Input PAD = OFF
Input sensitivity = –60 dBu
2
Maximum Voltage Gain
Monaural/Stereo Input Gain Control
Monaural High Pass Filter
Channel Input PAD
Crosstalk (1 kHz)
Monaural Input Channel Equalization:
3
Max. Variation
Stereo Input Channel Equalization:
3
Max. Variation
Internal Digital Effects
MONO Low Pass Filter
Monaural/Stereo Input Peak Indicator
Monaural/Stereo Input Signal Indicator
Level Meters
Phantom +48 VDC Power
(Balanced input)
Included Accessory
Option
Lamp
Power Supply
Power Consumption
× ×
Max. Dimensions (W H D)
Weight
Where 0 dBu = 0.775 V and 0 dBV= 1 V
1
Rs = 150 ohms
Measured with 12.7 kHz, –6 dB/oct. low pass filter (equivalent to 20 kHz, –∞ filter).
2
Turning PAN/BAL to left or right.
3
Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost.
20 Hz–20 kHz +1 dB, –3 dB @+4 dBu, 600
< =
0.1% (THD+N) @+14 dBu, 20 Hz–20 kHz, 600
–128 dBu
–99 dBu
1
–83 dBu (87 dB S/N)
–78 dBu (82 dB S/N)
–64 dBu (68 dB S/N)
→
60 dB CH IN CH INSERT OUT
→
84 dB CH IN GROUP OUT/ST OUT (CH to ST)
→
94 dB CH IN ST OUT (GROUP to ST)
→
70 dB CH IN GROUP INSER OUT, ST INSERT OUT (CH to ST)
→
62.2 dB CH IN REC OUT (CH to ST)
→
76 dB CH IN AUX SEND (PRE)
→
86 dB CH IN AUX SEND (POST)/EFF SEND
→
80 dB CH IN ST SUB OUT (CH to ST)
→
58 dB ST CH IN GROUP OUT/ST OUT (ST CH to ST)
→
47 dB ST CH IN AUX SEND (PRE)
→
57 dB ST CH IN AUX SEND (POST)/EFF SEND
→
16 dB RETURN ST OUT
→
9 dB RETURN AUX SEND
27.8 dB 2TR INPUT
44 dB variable
80 Hz 12 dB/octave
0 dB/26 dB
–70 dB between input channels
–70 dB between input/output channels (CH INPUT)
±15 dB
HIGH 10 kHz shelving
MID 0.25–5 kHz peaking
LOW 100 Hz shelving
±15 dB
HIGH 10 kHz shelving
HI-MID 3 kHz peaking
LO-MID 800 Hz peaking
LOW 100 Hz shelving
Effect 1: 16 programs, parameter control
Effect 2: 16 programs, parameter control
TAP DELAY Control, Foot Switch (TAP)
80 - 120 Hz 12 dB/octave
One red LED per channel. Comes on when post-EQ signal level reaches +17 dBu.
One green LED per channel. Comes on when post-EQ signal level reaches –10 dBu.
Four 12-point LED meters [Stereo (L, R), PFL/AFL, GROUP (1 - 4)]
Peak point: red indicator
+5, +3, +1, and 0 points: yellow indicators
–1, –3, –5, –7, –10, –15, –20: green indicators
+48 V DC supply to balanced inputs. Can be switched ON/OFF in groups of eight channels.
(One switch for every eight channels.)
Power cord, Owner's Manual
FC5 (Foot Switch)
XLR-3-31 type (12 V AC between pins 2 and 3; 5W max. )
USA and Canada:
Korea:
Others:
MG32/14FX: 120 W, MG24/14FX: 100 W
×
MG32/14FX: 1027
MG32/14FX: 22 kg, MG24/14FX: 18.5 kg
Ω
(with gain control at minimum level)
Ω
(with gain control at maximum level)
Equivalent input noise (CHs 1 to 24 (MG32/14FX)/CHs 1 to 16 (MG24/14FX))
Residual output noise (ST, MONO OUT, AUX, EFFECT, GROUP OUT)
ST, MONO, GROUP Master fader at nominal level; all Ch assign switches off.
AUX master control at nominal level; all channel mix controls at minimum level.
ST, GROUP Master fader and one Ch fader at nominal level.
(CHs 1 to 24 (MG32/14FX)/CHs 1 to 16 (MG24/14FX))
→
ST OUT
120 V AC, 60 Hz
220 V AC, 60 Hz
230 V AC, 50 Hz
×
140 551 mm, MG24/14FX: 819
× ×
140 551 mm
MG24/14FX
MG32/14FX
3