Advertisement
K TIME CODE IN connector
This balanced XLR3-31 connector receives SMPTE
time code (LTC) for analog input from the external
device. The rated input level is –10 dB, and the pin
assignment is as follows.
1=ground, 2=hot, 3=cold
L CONSOLE I/O 1, 2 slots
Connect these slots to the DIGITAL I/O CONSOLE
jacks of the CS1D control surface to transmit multi-
channel digital audio signals. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
M CASCADE IN, OUT slots
Use one of these connectors to cascade two DSP1D/
DSP1D-EX units to transmit multi-channel digital
audio signals. Use a genuine Yamaha half-pitch 68-pin
cable to connect the CASCADE IN (or OUT) to the
CASCADE OUT (or IN) of another DSP1D/DSP1D-
EX.
These connectors are provided for future system
expansion, but they are not operative in the current
software version.
Specifications
Sampling frequency
Power supply
Power consumption
Dimensions (W
H
D)
Weight
Operating temperature
Fan circuit
Accessories
Digital I/Os
I/O connectors
DIGITAL I/O INPUT 1 –10
DIGITAL I/O OUTPUT 1 – 6
DIGITAL I/O CASCADE IN, OUT
DIGITAL I/O CONSOLE I/O 1, 2
CONTROL I/O CONSOLE 1 IN, OUT
CONTROL I/O CONSOLE 2 IN, OUT
REMOTE RS-422
GPI
TIME CODE IN
MIDI IN, OUT, THRU
PC CONTROL RS-232-C
PC CONTROL USB
WORD CLOCK IN
WORD CLOCK OUT
6
N OUTPUT 1–6 slot
O INPUT 1–10 slot
P Ground connector
<External sync> 39.69 kHz – 50.88 kHz
<Internal sync> 44.1 kHz, 48 kHz
USA and Canada : 120 V, 60 Hz
Others : 230 V, 50 Hz
170 W
480 mm
408.7 mm
460.8 mm
33 kg
10 – 35˚C
always fixed
power cable 2.5 m
1
Level
RS-422
RS-422
RS-422
RS-422
–0.225V — –1.825V/50
–0.225V — –1.825V/50
RS-422
C-MOS IN, Open collector OUT
1 pin: 150mA, 8pin total: 500mA
SMPTE format, Nominal –10 dB/10 k
MIDI format
RS-232-C
0V — 3.3V
TTL/75
(ON/OFF)
TTL/75
Use these slots to connect the INPUT connectors of an
analog output unit AO8 series or DIO8 digital I/O
unit to output multi-channel digital audio signals
from the DSP1D/DSP1D-EX. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
Use these slots to connect the OUTPUT connectors of
an analog input unit AI8 series or DIO8 digital I/O
unit series to input multi-channel digital audio signals
to the DSP1D/DSP1D-EX. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
Be sure to ground the unit to avoid the risk of electrical
shock before you insert the power plug into an AC outlet.
This product comes with a 3-pin power cord. If the
ground connector of the AC outlet has already been
grounded, the unit will be grounded effectively by
using the 3-pin power cord.
Grounding the unit is also effective for preventing
hum and other noise.
D-sub, half-pitch, 68-pin connector (female)
D-sub, half-pitch, 68-pin connector (female)
D-sub, half-pitch, 68-pin connector (female)
D-sub, half-pitch, 68-pin connector (female)
BNC connector
2
BNC connector
2
D-sub, 9-pin connector (female)
D-sub, 25-pin connector (female)
XLR-3-31 type connector
5-pin DIN connector
D-sub, 9-pin connector (male)
B type USB connector
BNC connector
BNC connector
Type
10
6
2
2
3
Advertisement
