3.1.2 Removing the Tuner pack (See Fig.3, 4)
(1) Disconnect the card wire from Tuner pack connected to
connector
CN306
of the Micom board. (See Fig.3)
(2) Remove the two screws C attaching the Tuner pack. (See
Fig.4)
3.1.3 Removing the Rear panel (See Fig.5)
(1) Remove the five screws D attaching the Rear panel.
1-8 (No.MB674<Rev.003>)
CN306
Fig.3
Fig.4
Fig.5
C
D