JVC UX-G500VB Service Manual page 17

3.2.3 Removing the feed motor assembly
(See Fig.12)
(1) Remove the one screw G attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.
3.2.4 Removing the spindle motor assembly
(See Fig.13)
(1) Remove the three screws H attaching the spindle motor
from spindle motor board.
Solder part
Middle gear
Lead screw
Fig.12
H
Fig.13
G
Spindle motor
(No.MB674<Rev.003>)1-17