Entering A Frequency Directly - Alinco DR-735T(2) Instruction Manual

Useful functions

Entering a frequency directly

Frequencies can be entered directly by pressing the numerical keys of the microphone.
1. Set the microphone DTMF/REMOTE
switch to the REMOTE position.
2. DTMF keys can be used to enter total 6
digits from the digit for 100 MHz to digit
for1 KHz.
If entered frequency be out of tuning step, closest digit
will set.
(Ex.) When setting 144.20 MHz with the turning step set
to 20 KHz.
Enter 1 4 4 2 0
After entering the last digit a slightly longer beep is
emitted and the entry is completed.
To cancel an entry before it is completed, press the PTT
key or C key.
47