Csm (Compatibility Support Module) - Efco TPC-5215 User Manual

Boot From Onboard LAN: Use this item to enable or disable the Boot From Onboard
Setup Prompt Timeout: This shows the number of seconds to wait for setup activation
Bootup Num-Lock: If this item is set to [On], it will automatically activate the Numeric
Boot Beep: Select whether the Boot Beep should be turned on or off when the system
boots up. Please note that a buzzer is needed.
Full Screen Logo: Use this item to enable or disable OEM Logo.
AddOn ROM Display: Set display mode for Option ROM.
Fast Boot
Boot From Onboard LAN
Bootup Num-Lock
Boot Beep
Full Screen Logo
AddOn ROM Display

3.7.1 CSM (Compatibility Support Module)

Enable to launch the Compatibility Support Module. Please do not disable unless
you're running a WHCK test. If you are using Windows® 8 64-bit and all of your
devices support UEFI, you may also disable CSM for faster boot speed.
3. If you are using an external graphics card, the VBIOS must
support UEFI GOP in order to boot.
LAN feature.
key.
Lock function after boot-up.
Function Item
Table_26 – Boot Setting
Select Item
Disabled (Default
Fast
Ultra Fast
Disabled (Default
Enabled
On
Off
Disabled (Default
Enabled
Disabled
Enabled (Default setting)
Enabled (Default setting)
Disabled
50
setting)
setting)
setting)