Table of Contents
Advertisement
3.3 Installing Driver To Windows NT
1.
Install ENW-9607M into your PC's PCI slot.
2.
Power on the PC and insert Driver Disk into CD-ROM drive.
3.
Click START -> SETTINGS -> CONTROL PANEL -> NETWORK.
4.
Select ADAPTERS.
Click "ADD" button.
5.
Select "HAVE DISK".
6.
Assume "E" is the CD-ROM drive. Enter the path as "E:\Drivers\ENW-9607M\WinNT.
7.
8.
Click OK.
Select the "PLANET ENW-9607M 1000Base-SX/LX SFP Gigabit Ethernet Adapter (Marvell
9.
Chip)" entry that matches your adapter.
10. Click OK.
11. Select the appropriate configuration.
12. Click OK.
13. Restart your system.
?
We strongly recommend you to install the latest Windows NT4 Service Pack
AFTER successful installation of the driver
Note:
3.4 Installing Driver To Linux
1. Login as 'root'.
2. Unpack the driver installation package using the command
# tar xfvj install-???.tar.bz2
or
# bunzip2 -c install-???.tar.bz2 | tar xfv -
3. To start the driver build process, go to the directory DriverInstall
10
Advertisement
Table of Contents
