Beeping And Alarms - Pulse Secure PSA7000 Hardware Manual

PSA7000 Hardware Guide
The PSA7000F has four INT/EXT fiber ports located on the front:
Each SFP+ connector has two LEDs. The LED on the left indicates the activity status of the connector.
The LED on the right indicates link speed:
LED Color
Activity Blinking green
Link Yellow
Green

Beeping and Alarms

Beep Code
5 short beeps + 1 long beep every
5 seconds
Continuous beep ("i" LED on
front panel turns RED)
Continuous beep (Power failure
LED comes on, Front panel)
© 2017 Pulse Secure, LLC. All rights reserved
Description
Activity
1 Gbps link speed
10 Gbps link speed
Description
No memory detected in the system
System overheat condition
a) Both power supply modules connected but one power cord
connected
b) One of the two power supplies has failed
9