Philips VTR5500 Manual page 44

• If the device cannot work normally, please make sure the
device is not out of power.
• When the device is recording, please do not cut the power,
otherwise damaged file or malfunction may be resulted.
• When the battery indicator "
charge the device promptly.
Recharge
(1) Connect the device to PC through USB cable.
(2) Use special charger to recharge.
When using the above methods to recharge, the device enter
the recharging state. The battery indicator shows a battery icon
turning from empty to full repeatedly, indicating that the device
is recharging. Under normal circumstance, the device can be
fully recharged in around 3 hours. When recharging, keep the
power switch in the ON position.
Key Lock (HOLD Function)
(1) Slide the HOLD switch to lock position to lock all the
" is displayed, please
44