Advertisement
PROGRAMMING
QUICK START
Press the MODE button until you are on AUTO mode. This mode works like a thermostat.
Press the up and down triangle buttons to change the SETTING temperature on the screen.
The PROBE temperature is what the thermal probe is measuring. When the PROBE
temperature exceeds the SETTING temperature, the fans will start running.
SPEED SETTING
In this mode, the fans will run non-stop regardless
of temperature. Pressing the up and down buttons
in this mode will change the speed of the fan.
Which ever speed is designated in this mode will
also be the speed used in AUTO Mode and the
max speed of the fans in SMART Mode
AUTO MODE
This is the thermostat setting where the fans
will start running when the PROBE temperature
reaches or surpasses the SETTING temperature.
The SETTING temperature can be designated by
pressing the up and down buttons while in this
mode. Once the fans start running, the PROBE
temperature will need to fall at least 2° F
below the SETTING temp for the fans to stop
running. This variation buffer can be changed.
Please see page 15 for more information.
14
PROBE
.
PROBE
AUTO
SETTING
SPEED
o
F
o
F
ALARM
BUFFER
o
F
SPD
SETTING
SPEED
o
F
o
F
ALARM
BUFFER
o
F
o
F
o
F
Hide quick links:
Advertisement
