Advertisement
PROGRAMMING
1. MODE BUTTON
Cycles through the modes:
AUTO, SMART, SPEED,
ALARM, BUFFER. Holding
for three seconds will lock or
unlock the display.
4. PROBE TEMP.
Actively shows the current
temperature that the corded
thermal probe is measuring.
Will show "- -" if no probe is
plugged in.
7. FAN SPEED
The settings for the max
speed the fans can reach.
Shows what speed the fans
are currently running at. Six
speeds are available.
10. ALERT ICONS
The icons on the display represents fan failure, alarm, and display lock. The icons will flash
and may emit an audible beep when triggered.
2. LEAF BUTTON
This turns the display off
while programs run in the
background. Holding will
change degrees to
Fahrenheit or Celsius.
5. SETTING TEMP.
Shows the temperature you
have set for the fan system
to trigger in AUTO and
SMART Mode, which share
the same set temp.
8. BUFFER
The buffer range settings
of AUTO and SMART Mode
programming. Please see
pages 15 for more
information.
3. UP / DOWN BUTTON
The up and down buttons
adjusts the settings of the
mode that you are in. Up
button increases and
down button decreases.
6. ALARM TEMP.
Shows the temperature
that you set the fan's
alarm system to trigger.
Please see page 16 for
more information.
9. MODE
Shows what Mode the
controller is in: AUTO,
SMART, SPEED, ALARM,
or BUFFER. Please see
pages 14 -16 for more info.
13
Hide quick links:
Advertisement
