Alcatel-Lucent 7450 Configuration Manual page 360

Show, Clear, and Debug Command Reference
ip-int-name — Only displays the interface information associated with the specified IP interface
packet
Syntax packet [ip-int-name | ip-address] [headers] [protocol-id]
no packet [ip-int-name | ip-address]
Context debug>router>ip
Description
This command enables debugging for IP packets.
Parameters
ip-int-name — Only displays the interface information associated with the specified IP interface
ip-address — Only displays the interface information associated with the specified IP address.
headers — Only displays information associated with the packet header.
protocol-id — Specifies the decimal value representing the IP protocol to debug. Well known
route-table
Syntax route-table [ip-prefix/prefix-length]
route-table ip-prefix/prefix-length longer
no route-table
Context debug>router>ip
Description
This command configures route table debugging.
Parameters
ip-prefix — The IP prefix for prefix list entry in dotted decimal notation.
360
name.
Values 32 characters maximum
name.
Values
32 characters maximum
protocol numbers include ICMP(1), TCP(6), UDP(17). The no form the command removes
the protocol from the criteria.
Values
0 to 255 (values can be expressed in decimal, hexadecimal, or
binary)
Values The following values apply to the 7750 SR and 7950 XRS:
Router Configuration Guide