Table of Contents
Advertisement
Option Menu
Item
Use this option to adjust: the color: white bright or dark.
Press
Select from ON or OFF.
White Enhance
•
ON: Emphasizes the bright portions of images.
•
OFF: Disables "White Enhance".
Press
This mode uses less power and extends the lamp life, but decreases the lamp brightness.
Select from ON or OFF.
ECO. Mode
Note:
•
Although noise is reduced when "ECO" is set to "ON", the brightness decreases by 20%.
•
"ECO" mode is "ON" by default.
Press
Power Off mode. Select from ON or Off.
When set to "ON", 5 minutes before the power turns
off, the message shown right will appear on the
Auto Power Off
screen to indicate the remaining minutes.
Note:
When the Auto Power Off function is set to "ON", a warning, "Power OFF in 5 min." displays five
minutes before the power turns off.
Press
Source Select
Select from Manual or Auto.
Press
OSD Timeout
Select from 5 secs, 15 secs, or 60 secs.
This function allows you to set the transparency of the OSD menu. When set to transparent, you
can see the image behind the menu.
OSD Blending
Press
Select from ON or OFF.
Press
PRJ Mode
This function can be used for the reversed image and ceiling-mount setups.
Select from Front, Front Ceiling, Rear, or Rear Ceiling.
or
button to enable or disable white color enhancement of the image.
or
button to enable or disable the power saving of the projector.
or
button to enable or disable the Auto
or
button to select the Source output mode.
or
button to set the OSD timeout option.
or
button to enable or disable the on-screen display behind the menu.
or
button to set the image projection mode.
Description
29
Advertisement
Table of Contents
