Connecting The Thumbscrew Cables; Plug And Play" Function - Planar PD7130 User Manual

Connect the projector to the computer
using a DVI-D cable (sold separately).
Note
• Select the input signal type of the video
equipment.

Connecting the Thumbscrew Cables

Connect the cable making sure that it fits correctly into the terminal.
Secure the connectors by tightening the screws on both sides of the
plug.
Do not remove the ferrite cores attached to the cable.

"Plug and Play" Function

This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer automatically send settings, allowing for quick and easy setup.
Before using the "Plug and Play" function, be sure to turn on the projector first and the computer last.
Note
• The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Optional
accessory
Desktop Computer
DVI-D cable
To DVI Digital output terminal
DVI-D cable
(sold separately)
Ferrite cores
13