Connecting to Component
Video Equipment
Using a Component Cable (Component 1
or 2)
Use a component cable when connecting
component video equipment such as DVD
players and DTV* decoders to the Component
1 or 2 terminals.
*DTV is an umbrella term used to describe the
new digital television system.
Note
• When connecting the projector to video
equipment in this way, set "Input Source" to
"Component 1 or 2" in the "Main" menu.
Connecting Using the DVI
Cable
Use the DVI cable when connecting video
equipment with DVI output such as DVD
players and DTV* decoders to the DVI
terminal.
Note
• Select the input signal type of the video
equipment.
10
To analog component
output terminal
Component cable
DVD player or
DTV* decoder
(sold separately)
The device's component jacks may be labeled Y, CB and
CR. Connect each jack as shown below.
Projector
DVD player or
DTV decoder
Optional
accessory
DVD player or
DTV* decoder
DVI-D cable
(sold separately)
Y
P
P
B
R
Y
C
C
B
R
DVI-D cable