Ford Fusion 2013 Manual page 143

Hide thumbs Also See for Fusion 2013:

Table of Contents

The power point temporarily turns off

power if the 150 watt limit is exceeded. It

can also switch to a fault mode when it is

overloaded, overheated, or shorted. Unplug

your device and switch the ignition off then

on for overloading and shorting conditions.

Let the system cool off, then turn the

ignition off then on for an overheating

The power point is not designed for electric

devices such as:

Cathode ray tube type televisions

Motor loads, such as vacuum cleaners,

electric saws and other electric power

tools, compressor-driven refrigerators,

Measuring devices, which process

precise data, such as medical

equipment, measuring equipment, etc.

Other appliances requiring an

extremely stable power supply:

microcomputer-controlled electric

blankets, touch sensor lamps, etc.

Auxiliary Power Points

I n f o r ma t i o n P r o v i d e d b y :

Troubleshooting