Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ford FE1-25
Summary of Contents for Ford FE1-25
-
Page 2: Table Of Contents
FE1-25 APPLICATION ................2 DESCRIPTION (FIG A) ............2 PACKAGE CONTENT LIST ............2 SYMBOLS ..................3 GENERAL POWER TOOL SAFETY WARNINGS ....3 Work area safety ....................3 Electrical safety ....................4 Personal safety ....................4 Power tool use and care ................5 Service ........................ -
Page 3: Application
FE1-25 POLISHER FE1-25 1 APPLICATION The hand held electric polisher is suitable for non-professional use. Any other use other than polishing and light sanding is strictly forbidden. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions. -
Page 4: Symbols
FE1-25 SYMBOLS The following symbols are used in this manual and/or on the machine: In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary. Read manual before use... -
Page 5: Electrical Safety
FE1-25 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. -
Page 6: Power Tool Use And Care
FE1-25 Power tool use and care Do not force the power tool. Use the correct power for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. -
Page 7: Special Safety Regulations
FE1-25 6 SPECIAL SAFETY REGULATIONS The polisher must have reached full speed before coming into contact with the surface to be polished. Must not be used for applying abrasives. Use correct type of polishing cap for the job and replace when worn. -
Page 8: Operating Instructions
FE1-25 9 OPERATING INSTRUCTIONS Connect polisher to the mains. Hold safety switch (3) down whilst simultaneously pressing on/off button (3). Set polisher to desired speed using speed selector (4). Apply polishing cap to surface to be polished, and move polisher gently in a figure-of-eight pattern. -
Page 9: Warranty
FE1-25 WARRANTY This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. -
Page 10: Cleaning And Maintenance
FE1-25 CLEANING AND MAINTENANCE Before carrying out any maintenance to your machine, always remove the plug and/or remove the battery. 14.1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Herculano Santos, Lda, declares that, Product : Polisher Trade mark : Ford-tools Model : FE1-25 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the FE1-25 and is the answer not in the manual?
Questions and answers