Set Channels; Automatic Channel Searching; Manual Channel Setting; Search Digital Channels - Philips 55PUT7032/56 User Manual

7 Set Channels

For the first time setup, the system will remind
you to select network connection or TV channel
installation. The Section provides the instructions
on how to reinstall and fine-tune channels.

Automatic Channel Searching

1. Press key.
2. Select Channel > Channel Settings and then
press OK key.
3. Press OK key to begin automatic channel
searching.
Note

This function can be used only in TV
mode.

Manual Channel Setting

Step 1 Select System
1. Press key.
2. Select Channel > Analog channel manual
installation.
3. Choose to begin scanning and fine-tuning.
Note

Frequency fine-tuning can be performed
only when the source is ATV.
Step 2 Search and Store New Channels
1. Press key.
2. Select Channel > Analog channel manual
installation > Begin Scanning.
 You can directly input the channel
frequency.
 Choose to Scan and then press OK key
to begin scanning.
3. Upon searching completion, select Save to
quit the current interface.
 Save the searched channels.
Step 3 ATV Fine Tuning
1. Press
2. Select Channel > Analog channel manual
installation > Fine-tuning.
3. Select Decrease or Increase to adjust the
frequency.

Search Digital Channels

1. Press
2. Select Channel > Digital channel manual
installation and then press OK key.
3. Directly input the channel frequency
4. Choose Scan and then press OK key to
begin scanning.
EN 16
key.
key.