Console Outputs - SoundCraft Notepad 5 User Manual

NOTEPAD
INPUTS & OUTPUTS > CONSOLE OUTPUTS
The console outputs offer connection options depending on the application. Always consider carefully
the best output and routing strategy for your particular application.
MASTER
Master Left and Right outputs, XLR connectors
These are impedance-balanced line level outputs. The XLR outputs are labelled 'MASTER L' and 'MASTER R' , which
refers to Master Left and Right outputs of the main stereo output. These should be connected to the input of your
amplifier, PA system, recorder or similar.
AUX
Auxiliary output connector - quarter-inch TRS Jack labelled AUX.
These connections can operate in two modes. The default mode is an impedance-balanced line level output. This
is a mono sum of the Auxiliary bus. Pressing the OUTPUT TYPE switch changes the mode of the output for the con-
nection of stereo headphones. On Notepad 8FX and 12FX with this output it is therefore possible to have a second
headphone output.
HEADPHONES
Stereo headphone output - quarter-inch Jack.
The headphone signal is always the Master Stereo Output unless the USB RTN 3/4 function is activated on the Note-
pad-12FX by pressing the button above the phones level control. In that case, the headphone output is switched to
route channels 3 and 4 of the USB.
5, 8FX, 12FX User Manual

3.3: CONSOLE OUTPUTS

3.3: CONSOLE OUTPUTS