Parts Of The Console - SoundCraft Notepad 5 User Manual

NOTEPAD
GETTING STARTED > PARTS OF THE CONSOLE
Inputs & Outputs
The Notepad console features a variety of physical inputs and outputs for getting audio in and out of the
console:
• XLR inputs for balanced audio from a microphone or line level source
• TRS balanced jack for line level balanced or unbalanced sources
• RCA inputs for unbalanced consumer audio sources
• USB for computer, smart-phone or tablet digital audio.
• XLR outputs for impedance-balanced signals
• TRS jack output for impedance-balanced signals
• Stereo TRS jack output for headphones
Refer to Section 3.0 for more detail and to section 7.0 for detailed information on USB functionality.
Mono Input Channels
Mono input channels control the levels, routing, and EQ on single channel audio inputs.
• All mono input channels have both microphone and line-level capability.
• In addition, specific channels feature Hi-Z inputs for high impedance sources such as guitar pick-ups.
Refer to Sections 4.2 and 5.1.1 for more detail.
Stereo Input Channels
Notepad consoles have two types of stereo inputs.
• Stereo Jacks - Connect left and right signals to the left and right jack inputs. On these channels, a mono
source may also be used. In this case, connect a jack only to the left input. Internal contacts on the jack
socket route this signal to both left and right of the mix.
• Stereo RCA - this is the highest numbered stereo channel on the console and offers stereo line level
RCA inputs. This channel is also the 'Playback Channel' and stereo audio from USB is summed into this.
Refer to Sections 4.2 and 5.1.2 for more detail.
5, 8FX, 12FX User Manual

2.2: PARTS OF THE CONSOLE

2.2: Parts Of The Console