SoundCraft Notepad 5 User Manual page 13

NOTEPAD
GETTING STARTED > PARTS OF THE CONSOLE
FX Return (Notepad 12FX only)
The FX return channel takes its input from the output of the internal Lexicon FX processor.
• It is a stereo input channel but without input trim control or EQ.
• Two jack inputs are provided which, when a jack is plugged in replace the internal effects routing to the
FX return channel.
Refer to Sections 4.3 and 5.1.3 for more detail.
Aux Output (Notepad 8FX and 12FX)
The Aux output signal is derived frovm a mix of all the contributing channel Aux/FX send controls.
Refer to Sections 4.4 and 5.2 for more detail.
Monitor Output (Notepad 5 only)
Aux (Auxiliary) Master output channels control the output level of the auxiliary bus and global pre-fade/
post-fader switching. AFL switching allows aux master solos.
Refer to Sections 4.5 and 5.4 for more detail.
Master Stereo Output
Controls the output level of the Master Stereo bus.
Refer to Sections 4.6 and 5.4 for more detail.
Metering
The meters on the Notepad show Master Left/Right output level.
Refer to section 5.4 and 6.0 for more detail.
Lexicon FX Control
Notepad-8FX and -12FX consoles have an internal Lexicon FX processor and send bus for adding effects
such as reverb, chorus and delay. Each effect has a parameter adjustment affecting one or more features
of the effect.
Refer to section 8.0 for more detail.
Global Phantom Power
48V phantom power is always active on each of the console microphone inputs so you can use Condens-
er/Capacitor microphones, active DI boxes, and other devices requiring phantom power. See section 5.1.1
for more detail.
Headphone Level Control
Level control for the monitoring output - either the Master Stereo Output, or the Aux Bus. See section 6.0
for more detail.
5, 8FX, 12FX User Manual
2.2: PARTS OF THE CONSOLE
2.2: Parts Of The Console