JVC MX-J270V Service Manual page 21

Removing the capstan motor (See Fig. 8)
From the joint bracket, remove the two screws "C"
retaining the capstan motor.
Removing the flywheel
1.Remove the head amp. and mechanism control
P.C.Board.
2.Remove the capstan motor assembly.
3.After turning over the cassette mechanism, remove
the slit washers "a" and "b" fixing the capstan shafts
R and L, and pull out the flywheels R and L respectively
from behind the cassette mechanism.
Flywheel R
Removing the reel pulse P.C.board and solenoid
1.Remove the five pawls (c,d,e,f,g) retaining
the reel pulse P.C.Board.
2.From the surface of the reel pulse P.C.Board parts,
remove the two pawls "h" and "i" retaining the solenoid.
(See Fig. 9,10)
Flywheel L
Fig.10
(See Fig. 11)
h
Solenoid
Flywheel R
a
Slit
washer "a"
c
d
i
Solenoid
MX-J270V
C
Capstan motor
Joint
bracket
C
Fig.8
Flywheel L
b
Slit
washer "b"
Fig.9
g
f
e
Reel pulse board
Fig.11
1-21