Planar PL170M Manual page 12

V-OSD POSITION
POSITION using [+] or [ ] button, then press [Menu] button to activate the function. Press the
[+] button to move the OSD position up, [ ] button to move down. Then Press [Menu] to return
to MISC Sub-Menu after adjustment.
SMOOTHING
Makes the displayed texts smooth. Select SMOOTHING using [+] or [ ]
button, then press [Menu] button to activate the function. Press [+] or [ ] button and adjust to
your liking shown below. Press [Menu] button to return to MISC Sub-Menu.
INVISIBLE
Activates the OSD background to be invisible. Select INVISIBLE using the
[+] or [ ] button, then press [Menu] button to select either On or Off option. Press the [+] or [ ]
button to return to the MISC Sub-Menu.
INFORMATION
graphics card in the computer. Select INFORMATION using the [+] or [ ] button, then press
[Menu] to display the mode shown below. Then press [Menu] button to exit OSD or go to
MISC to return to MISC Sub-Menu.
RECALL
eturns the adjustments back to factory settings if the monitor is not operating
R
at its original factory settings. Select RECALL using the [+] or [ ] button, then press [Menu]
button to reset the settings.
EXIT
Turns off the OSD. Select EXIT using the [+] or [ ] button, then press [Menu] to exit
the OSD.
Moves the OSD position on the screen up or down. Select V-OSD
isplays the timing mode (video signal input) coming from the
D
11
E
N
G
L
I
S
H