Misc Sub-Menu - Planar PL170M Manual

move the screen to the right, [ ] button to move to the left. Press [Menu] to return to LCD
ADJUST Sub-Menu.
V–POSITION
E
or [ ] button, then press [Menu] to activate the function. Press [+] button to move the screen
N
G
image up, [ ] button to move down. Press [Menu] to return to LCD ADJUST Sub-Menu.
L
I
S
H FINE TUNE
button, then press [Menu] button to activate the function. Press [+] or [ ] button until the
screen image looks crisp, sharp and focused. Press [Menu] to return to LCD ADJUST Sub-
Menu after alignment.
AUTO–SYNC
button to select AUTO SYNC, then press [Menu] button to activate AUTO SYNC.
NOTE:
When setting up this monitor for the first time, perform AUTO-SYNC before use.
To perform AUTO-SYNC, first display an image that makes the entire screen very
bright. It is better to perform AUTO-SYNC under WINDOWS.
LANGUAGE
scroll to Language using [+] or [ ] button, then press [Menu] button to activate the function.
Press [+] or [ ] button to choose preferred Language, then press [Menu] button to save
selection and exit OSD or go to MAIN MENU to return to OSD Main Menu.

MISC Sub-Menu

Under the Main Menu, select MISC using the [+] or [ ] button, then press [Menu] button to
enter MISC Sub-Menu.
H-OSD POSITION
OSD POSITION using [+] or [ ] button, then press [Menu] button to activate the function.
Press the [+] button to move the OSD position to the right, [ ] button to move left. Then Press
[Menu] to return to MISC Sub-Menu after adjustment.
Moves the screen image up or down. Select V-POSITION using the [+]
Aligns the performance slightly. Select FINE TUNE using the [+] or [ ]
Automatically adjusts the image to the best performance. Press [+] or [ ]
Selects preferred language used in the OSD menus. Under Main Menu,
Moves the OSD position on the screen to the right or left. Select H-
10