Table of Contents
Advertisement
User's Manual
Note:
1. No Signal coming
When the monitor is ON and there is
no Video signal received, the
following message will be displayed.
2. Signal out of monitor's supported range (Please refer to tht attached
Addendum)
When the frequency range is out of the monitor's specifications, the display will
show the following message on two cases:
Case 1:
The incoming resolution is lower than
or equal to 800x600.
In this case, the screen display will not
be centered and a warning message
appears.
Case 2:
The incoming resolution is higher than
800x600.
In this case, the video data will be
turned off and a warning message
appears at center.
12
Advertisement
Table of Contents
