Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Schlage PG1000
Summary of Contents for Schlage PG1000
- Page 1 PG1000 USB Proximity Desktop Reader and Programmer User Guide...
-
Page 2: Table Of Contents
Contents Contents Requirements and Specifications ......................... 3 Items needed (Included in the box): ........................3 Computer Requirements ............................ 3 Minimum ............................... 3 Recommended ............................. 3 Technical Specifications ............................. 3 Installation Procedure ............................4 Installing the Software: ............................4 Installing the Hardware: ............................4 Operation ................................. -
Page 3: Requirements And Specifications
Requirements and Specifications Requirements and Specifications Items needed (Included in the box): 1. Schlage Desktop Proximity Programmer and Credential Reader 2. Host A to Device mini-B USB Cable 3. Compact Disc containing the software user interface and this user manual 4. -
Page 4: Installation Procedure
Installation Procedure Installation Procedure The order of installation does not matter, though installing the Software first is recommended. Installing the Software: 1. Place the installation CD in the CD-ROM drive. 2. The disk should auto-play. If the disc does not auto-play: a. -
Page 5: Operation
Operation Operation Default After the Desktop Reader/Programmer has been plugged into the host computer, it will function as a desktop reader. In this mode the device behaves much like a keyboard. If a user presents a credential before setting the decoding options, the device will print the binary information of the card into the active window or data field if it receives text. -
Page 6: Programmer Mode
Operation Programmer Mode To get the device into Programmer Mode, the user must click the programmer tab at the top of the application window. This will change the window to allow the user to program a card or multiple cards. The user must then specify all of the following options then click the program button. -
Page 7: Troubleshooting
Troubleshooting Troubleshooting Problem Solution Solution Device is not recognized by my Unplug device from PC and plug it Unplug device from USB port and plug computer back in into a different USB port Device not programming cards Verify that the device is in programmer Verify cards are XceedID Proximity mode the LED indicator should be credentials (Device will not program... - Page 8 ©2010 Schlage Lock Company 23735699 Rev. 10/10-a...