Nokia 6800 Service Manual page 13

nokia
C P
ONNECTING EOPLE
Nokia NMP/CMO Sales and Marketing
Customer Care EMEA
Technical Services, Repair Concepts
The LCD Metal Frame is attached with snaps to the
Engine Module on both sides. SRT-6 can be used to
release the snaps.
Note the right position of the LCD Module in LCD Metal
Frame when assembling. Also take care not to damage
the LCD spring contacts on Engine Module.
Do not remove the Earpiece from the LCD Frame, as
they are supplied as one part.
To remove the DC Jack, place tweezers between the
spring contacts and under the Jack. You'll need to use
additional force to pull the Jack upwards.
Service Manual 6800 & 6810 Level 1&2
PAGE 13 (24)
Confidential
Release the snap on the other side of the engine and
take away the LCD Module.
Separate the LCD Metal Frame from LCD Module and
protect the LCD window again.
Volume Key can be removed easily.
Use tweezers to pull up the Microphone.
Copyright 2003-2004 © Nokia Corporation
Approved 2.0
SQX 00618-en DJk
12.03.2004