Page 1
The Euro 8s is an 8 channel switch panel providing eight mains outputs, each with its own fuse and indicator, zero- switched for interference free operation. The Euro 8s is housed in a single unit high 19” rack mounting case, with individual IEC connectors for the outputs.
The Euro 8s must be installed by a competent electrician in accordance with the current IEE wiring regulations. CONNECTION The Euro 8s is not fitted with a mains plug. This is because: i) it is capable of controlling more than 13 Amps ii) it may be installed permanently iii) it is an appliance for professional use.
Page 3
If connecting inductive loads such as motors or discharge lighting (metal halide, fluorescent or neon) to the Euro 8s, make sure that the VA rating of the load does not exceed the figures above (1150VA per channel, 3450VA total). The VA rating should be labelled on the apparatus being connected.
Lighting controllers A lighting controller such as the NJD SC4000e or CC4000s may be connected to an output of the Euro 8s only if the total load connected to the controller does not exceed the single channel handling capacity of the Euro 8s...
User Guide Euro 8s TECHNICAL SPECIFICATION. Size: 482mm x 44mm (1U) x 110mm Weight: 1.2kg Maximum load: 5 Amps per channel 1.15kVA @ 230V AC 1.15kVA corresponds to a resistive load of 1150 Watts or an inductive load of approximately 800 Watts depending on power factor.