Advertisement
4
3
5
2
1
8
12
15
16
4
3
5
6
7
11
9
14
10
12
13
BLUETOOTH PAIRING INSTRUCTIONS:
To connect your Bluetooth device to the
Kustom Bluetooth receiver for the first
time, navigate to the Bluetooth settings menu
on you Bluetooth enabled device. Ensure that
Bluetooth is enabled and your Kustom
product is powered on. Perform a scan for
available devices. Select and pair to the
Kustom product in the list of available
devices. Enter 0000 for the passcode if
prompted. Once paired, a connection can be
established. Depending on the device, future
connections may be established automatically
when a previously paired Bluetooth device is in
range of the Kustom Bluetooth receiver.
The Bluetooth receiver in Kustom
Bluetooth products is an A2DP device and will
work with other A2DP compatible Bluetooth
devices including most smart phones.
Additional hardware and/or driver software
may be required for computers with integrated
Bluetooth adaptors due to a lack of support for
A2DP devices by some operating systems.
A2DP protocol only allows for one to one
device connections. Therefore, only one
Bluetooth device can be connected to a
Kustom Bluetooth product at one time.
Similarly, a Bluetooth device can only be
connected to one Kustom Bluetooth
product at one time. Plugging a 1/8" connector
into the AUX jack disables the Kustom
Bluetooth receiver.
Advertisement
