Advertisement
7. MAINTENANCE
WARNING! Ensure the pressure washer is switched off and unplugged from the mains electrical power supply and turned off at the
mains water tap before performing any maintenance tasks.
Check, clean or renew the inlet filter (which is fitted inside the inlet connector,) after every 50 hours of use.
7.1.
Nozzles
7.1.1. Ensure that both nozzles are kept clean and free of debris.
7.1.2. The variable nozzle should be lubricated regularly. Clogging of the nozzle causes the pump pressure to be too high and cleaning is
immediately required.
7.1.3. Separate the nozzle from the lance by unscrewing anti-clockwise (fig.5).
7.1.4. Clear the nozzle of any debris.
7.1.5. Flush the nozzle with water.
7.1.6. Reconnect the nozzle to the lance. Ensure that the nozzle clicks into place.
7.2.
Water Filter.
7.2.1. The pressure washer is equipped with a water inlet filter to protect the pump.
7.2.2. To clean the conical filter, remove quick fit connection and the filter from the pump inlet.
7.2.3. Backflush the filter to clean.
7.2.4. Replace filter and quick connection immediately to prevent any ingress of foreign matter into the pump.
7.3.
Cooling System.
The air vents, in and around the pressure washer, must be kept clean and free of any obstructions to ensure proper air cooling of the
motor during operation.
WARNING! Prevent water from penetrating the vents of the pressure washer to minimise the risk of damage to the machine and to
reduce the risk of shock to the operator.
7.4.
General.
Check unit, gun, nozzle, hose, connections and cables for damage. Immediately replace or repair with genuine parts.
7.5.
Storage.
7.5.1. Store in a location where the washer will not be subject to freezing conditions.
7.5.2. Make sure that the pressure washer has been drained of water and remove the hoses.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Ltd
Environmental Protection
WEEE Regulations
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
PW1750,PW2000
Issue:4 (L) - 01/06/17
Advertisement
