Technical Specifications - Sony VTX-D800U Service Manual

6. Technical Specifications for the SONY Cook (FTA DTT) IRD
• Receiver Type
• Inputs
RF input
Modulation
Input Frequency
Bandwidth
Symbol Rate
Input Level (BER)
Return Loss
Loop-through Loss
• Outputs
Video Outputs
Audio Output (Analogue)
Service Manual
VTX-D800U
VTX-D800E, VTX-D800N
DVB Terrestrial Receiver Decoder
1 x RF input from customer antenna 75Ω
termination
DVB-T (OFDM)
470 MHz - 862MHz (CH 21 to 69)
8 MHz
<1.5 to 15 Msymbol / Sec
QPSK = 2/3
QAM 16/64
QAM 8/16/64
> 8dB
+3dB power On /StBy
( Loop through is not supported in Power off state)
2 x SCART Sockets (EN50049-1)
TV - RGB/YC/CVBS + Stereo/Mono
Audio + Slow & Fast Blanking out.
(CVBS + Stereo Audio in)
SmartLink supported on this SCART only
VCR - CVBS + Stereo/Mono Audio out.
(CVBS + Stereo Audio
+ Slow Blanking in)
(CVBS = 1Vpk/pk @75Ohm, Audio In =
500mV @>10Kohm)
1 x Line level output <O/P of VCR
Scart> (1Vrms, < 470 Ohm) – supplied through
Standard 3 pin Jack connector (3.5mm combination
Connector).
-15 -
–91.7dBm
-82.8 dBm
-82.8 dBm