Go to
Identities
menu :
-
Go to desired identity with U/D Arrow keys
-
Validate with Enter key
o Modify digit value with U/D Arrow keys
o Move to another digit with L/R Arrow keys
o Move to activation icon with L/R and change with U/D
o Validate with Enter key
5.7.5
Radio
The
Radio
menu offers to change POCSAG radio parameters in RX, TX and view POCSAG
RSSI.
-
Select Receiver,
-
Validate with Enter key
5.7.5.1
Receiver
In
Receiver
you can change :
-
RX frequency
o Digit under change is blinking, you can modify its value with U/D arrow keys.
You move to other digit with L/R arrow keys
o If you enter a wrong value screen back light turns to red
-
Data rate
o You move to baud rate with L/R arrow keys
o When rate is blinking you can change it with U/D arrow keys
EPOC-S USERV1
SCOPE COMMUNICATIONS UK LTD
If square is black identity is active
Possible identity values are in green screen backlight
If identity value is prohibited screen backlight turns to red
Transmitter
or
POCSAG
Possible values are : 0512, 1200, 2400
with Arrow keys
Page
20/23