Transmitter; Pocsag; Auto-Test - scope EPOC-S User Manual

5.7.5.2

Transmitter

In Transmitter you can change :
- Recipient RIC code and sub-address
o Digit under change is blinking, you can modify it with U/D arrow keys
o You move to other digit with L/R arrow keys
- TX frequency
o Digit under change is blinking, you can modify its value with U/D arrow keys.
You move to other digit with L/R arrow keys
o If you enter a wrong value screen back light turns to red
- Data rate
o You move to baud rate with L/R arrow keys
o When rate is blinking you can change it with U/D arrow keys
5.7.5.3

POCSAG

In POCSAG you can read RSSI level in dBm from POCSAG emitter.
5.7.6

Auto-test

In Autotest menu user has the ability to test :
EPOC-S USERV1
SCOPE COMMUNICATIONS UK LTD
Possible values are : 0512, 1200, 2400
Page
21/23