Cisco XR 12000 Series Configuration Manual page 85

Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
area 0
interface Loopback0
!
interface TenGigE0/3/0/0
!
!
!
router pim vrf vpn1 address-family ipv4
rp-address 2.2.2.2
!
router pim vrf default address-family ipv4
rp-address 1.1.1.1
!
end
CE4:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco
IOS software configuration documentation.
interface Loopback0
ipv4 address 101.101.101.101 255.255.255.255
!
interface GigabitEthernet0/0/0/0
ipv4 address 101.1.1.2 255.255.255.0
!
interface GigabitEthernet0/0/0/3
ipv4 address 11.1.1.1 255.255.255.0
!
multicast-routing
address-family ipv4
interface all enable
!
!
!
route-policy pass-all
pass
end-policy
!
router bgp 400
bgp router-id 101.101.101.101
address-family ipv4 unicast
redistribute connected
!
neighbor 101.1.1.1
remote-as 100
address-family ipv4 unicast
route-policy pass-all in
route-policy pass-all out
!
!
!
router pim vrf default address-family ipv4
rp-address 2.2.2.2
interface Loopback0
!
interface GigabitEthernet0/0/0/0
!
interface GigabitEthernet0/0/0/3
!
!
end
OL-
Configuration Examples for Implementing Multicast Routing on Cisco IOS XR Software
Multicast Configuration Guide
MCC-77