Cisco XR 12000 Series Configuration Manual page 36

How to Implement Multicast Routing
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/0/CPU0:router# configure
Step 2
router pim [address-family {ipv4 | ipv6}]
Example:
RP/0/0/CPU0:router(config)# router pim
Step 3
rp-address ip-address [group-access-list]
[bidir] [override]
Example:
RP/0/0/CPU0:router(config-pim-default-ipv4)#
rp-address 172.16.6.22 rp-access
Step 4
old-register-checksum
Example:
RP/0/0/CPU0:router(config-pim-ipv4)#
old-register-checksum
Step 5
exit
Example:
RP/0/0/CPU0:router(config-pim-ipv4)# exit
Step 6
{ipv4 | ipv6} access-list name
Example:
RP/0/0/CPU0:router(config)# ipv4 access-list
rp-access
Multicast Configuration Guide
MCC-28
configure
router pim [address-family {ipv4 | ipv6}]
rp-address ip-address [group-access-list] [bidir] [override]
old-register-checksum
exit
{ipv4 | ipv6} access-list name
[sequence-number] permit source [source-wildcard]
end
or
commit
Implementing Multicast Routing on Cisco IOS XR Software Cisco ASR 9000 Series Routers
Purpose
Enters global configuration mode.
Enters PIM configuration mode, or PIM address-family
configuration submode.
Assigns an RP to multicast groups.
• If you specify a group-access-list-number value, you
must configure that access list using the ipv4
access-list command.
(Optional) Allows backward compatibility on the RP that
uses old register checksum methodology.
Exits PIM configuration mode, and returns the router to the
source configuration mode.
(Optional) Enters access list configuration mode and
configures the RP access list.
The access list called "rp-access" permits multicast
•
group 239.1.1.0 0.0.255.255.
OL-