Ipv4/Ipv6 Rules - D-Link DIR-879 User Manual

Section 4 - Coniguration
The IPv4/IPv6 Rules section is an advanced option that lets you conigure what kind
of traic is allowed to pass through the network. To conigure the IPv4 rules, from
the Firewall Settings page click IPv4 Rules. To conigure IPv6 rules, from the Firewall
Settings page click IPv6 Rules. To return to the main Firewall Settings page, click
Security Check.
To begin, use the drop-down menu to select whether you want to ALLOW or DENY
the rules you create. You can also choose to turn iltering OFF.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button
create a rule, the following options will appear:
Enter a name for the rule.
Name:
Enter the source IP address range that the rule will apply to, and using
Source IP
the drop-down menu, specify whether it is a WAN or LAN IP address.
Address Range:
Enter the destination IP address range that the rule will apply to, and
Destination IP
using the drop-down menu, specify whether it is a WAN or LAN IP
Address Range:
address.
Select the protocol of the traic to allow or deny (Any, TCP, or UDP)
Port Range:
and then enter the range of ports that the rule will apply to.
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 65 for more information.
Click Apply when you are done.
D-Link DIR-879 User Manual

IPv4/IPv6 Rules

.
Click Save when you are done. If you edit or
56