System Log - D-Link DIR-879 User Manual

Section 4 - Coniguration
The router keeps a running log of events. This log can be sent to a Syslog server, and
sent to your email address. In the Management menu on the bar on the top of the
page, click System Log.
Check this box to send the router logs to a SysLog Server. If this is
Enable Logging
disabled, there will be no other options on this page.
to Syslog
Server:
Enter the IP address for the Syslog server. If the Syslog server is
Syslog Server IP
connected to the router, select it from the drop-down menu to
Address:
automatically populate the ield.
If you want the logs to be automatically sent to an email address,
Enable Email
enable this option.
Notiication:
Enter the settings for your email account. These are obtained from
your email service provider.
If email notiication is enabled, this option will set the router to send
Send When Log
the log by email when the log is fully.
Full:
This option can be enabled to send an email according to a
Send On
preconigured schedule. See below.
Schedule:
If you enable On Schedule is enabled, use the drop-down menu
Schedule:
to select the time schedule that the rule will be enabled on. The
schedule may be set to Always Enable, or you can create your own
schedules in the Schedules section. Refer to page 65 for more
information.
Click Save when you are done.
D-Link DIR-879 User Manual

System Log

66